Produits

Specific additive designed to improve bonding and flexibility of technical mortars, scratch coats, plasters, skim coats and screeds. Increases adhesion to substrates, improves flexibility properties, reduces water absorption. Ideal also for fresh on fresh work, and as grout for concrete construction joints.

• Use instead of gauging water.

Specific retardant additive designed to improve bonding and flexibility of technical mortars, skim coats, plasters and screeds. Increases adhesion to substrates, improves flexibility properties, reduces water absorption.

• Use instead of gauging water.

Additive for mixing with Coper Mono Flex, to improve bonding with cementitious membranes.

• Use instead of gauging water, replacing by percentage.

Elastomer latex, superior technology, suitable for addition to adhesives, skimming plasters and repair mortars. Increases adhesion, improves flexibility and elasticity of products.

• Use instead of gauging water.

Specific additive for potable water tanks and pools­; added to Mineral K, increases waterproofing and flexibility of the mix.

• Mix 25 kg Mineral K + 5 l Sigillo Oro.

Ready to use plasticizer. Massaflu is a water solution of active polymers, able to disperse the granules of cement in a screed mortar and render the mix more plastic. Intended specifically for radiant screeds.

• Add Massaflu at a rate of 0.5 to 1.5 litres per 100 kg of cement.

Liquid waterproofer for plasters, mortars and concrete.

• Add 2.5 litres Murovita for every 50 kg of cement (for concrete).
• Add 10% Murovita to gauging water for mortar and plaster mixes.

Transparent salt-resistant primer for the treatment of masonry affected by rising damp and efflorescence. For indoor and outdoor use.

• Apply with brush, roller or spray.

N.B. Consult the technical bulletin before applying.

Ready to use one-part bonding coat, for the preparation of smooth substrates having little or no absorbency. Use on cement based substrates before applying plasters and skim coats. For indoor and outdoor use.

• Apply with brush or roller.

One-part water-based adhesion promoter, for absorbent and non-absorbent base coats and for the treatment of smooth substrates. Also suitable when laying new floors over existing floors. Ideal for the application of skim coats, self-levelling screeds and cement-based adhesives.
For indoor and outdoor use.

• Apply with short pile roller or brush.

Solvent-based protective stabilizing primer with high penetrating power, used as preparation for finish coats, including plastic resins, paints, liquid membranes, and Coper Max encapsulant for asbestos cement. Optimum as impregnant for plasters, fair-­faced stone and concrete, wet look. For outdoor use.

• Dilute first coat with Diluente 200.500 thinner at a rate of 20 to 30%, depending on the substrate.
• Apply with brush, roller or spray.

Water-based protective stabilizing primer, ready to use, with high penetrating power, for plasters, skim coats, etc. Also suitable for stabilizing finishes, including paint. For indoor and outdoor use.

• Apply with brush, roller or spray.

Transparent water-based primer. Controls absorption and facilitates adhesion of emulsion paints. Suitable also for slightly absorbent or slightly powdery substrates. For indoor and outdoor use.

• Dilute with water at a rate of 1:3 to 1:7.
• Apply with brush or roller.

Transparent water-based primer, superior technology. Controls absorption and facilitates adhesion of emulsion paints, wallpapers and acrylic coatings. Suitable also for slightly absorbent or powdery substrates. For indoor and outdoor use.

• Dilute with water at a rate of 1:3 to 1:7.
• Apply with brush or roller.

Transparent primer, ready to use, for the preparation of gypsum and drywall substrates­, before applying ceramic or mineral finish materials.

• Apply with brush or roller.

Transparent water-based primer. Controls absorption and facilitates adhesion of emulsion paints.

• Dilute with water at a rate of 1:2 to 1:5.
• Apply with brush or roller.

Transparent primer containing mixed potassium silicates, breathable, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa mineral paints formulated with mixed potassium silicates.

• Dilute with water up to 20%.
• Apply with brush or roller.

Transparent primer containing potassium silicates, high breathability, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa painted and trowelled finishes formulated with potassium silicates.

• Dilute with water up to 20%.
• Apply with brush or roller.

Transparent acryl-siloxane primer, breathable, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa painted and trowelled acryl-siloxane finishes.

• Dilute with water up to 20%.
• Apply with brush or roller.

Transparent siloxane primer, high breathability, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa painted and trowelled siloxane finishes.

• Dilute with water up to 20%.
• Apply with brush or roller.

Transparent water-based primer, mould-resistant, or protecting interior and exterior surfaces from the formation of mould, fungi and algae. Guarantees adhesion of products AB3 Antimuffa and AB3 Antimuffa Thermo.

• Dilute with water at a rate of 1:3 maximum.
• Apply with brush or roller.

Ready to use liquid disinfestant, resistant to moulds and bacteria, for application to walls, brick, concrete, etc.

• Apply with brush or sponge.

Base coat for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa trowelled acrylic and quartz-acrylic finishes.

• Dilute with water at a rate of 20 to 30%.
• Apply with brush or roller.

Base coat, superior technology, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa trowelled acrylic and quartz-acrylic finishes.

• Dilute with water at a rate of 20 to 30%.
• Apply with brush or roller.

Water-based product with notable hiding power. Ideal on drywall and traditional plasters. Guarantees adhesion of Buffa emulsion paints and: Ketty Paint, Paint Si, Top Color, etc.

• Dilute with water.
• Apply with brush, roller or spray.

Thick breathable base coat for Linea Contrasti products, containing lime putty. Can also be used as a thick finishing coat, to give a decorative matte look. For indoor and outdoor use.

• Apply with stainless steel trowel.

Base coat with notable hiding power, intended specifically for use with Buffa Linea Contrasti products featuring special effects. Can also be used as a finishing coat.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Base coat for use on walls, before applying Buffa Fior Lac and Fior Lac Satinato.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Transparent base coat containing mixed potassium silicates, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa mineral finishes formulated with mixed potassium silicates.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Transparent base coat containing potassium silicates, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa Risanavita ai Silicati F/M/G and Risanavita ai Silicati.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Transparent base coat containing siloxanes, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa Risanavita ai Silossani F/M, Risanavita ai Silossani and Arte Paint Velatura.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Transparent rustic base coat containing siloxanes, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa Risanavita ai Silossani F/M, Risanavita ai Silossani and Arte Paint Velatura.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Transparent acryl-siloxane base coat, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa Risanavita Acril Silossanico F/M and Risanavita Acril Silossanico.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Transparent rustic acryl-siloxane base coat, for the preparation of masonry surfaces. Guarantees uniform absorption of substrate and adhesion of Buffa Risanavita Acril Silossanico F/M and Risanavita Acril Silossanico.

• Dilute with water at a rate of 20% approx.
• Apply with brush or roller.

Breathable solvent.-based barrier coat formulated with siloxanes. Guarantees water-repellent and protective barrier for plasters, cotto, natural stone and fair-faced concrete. Ideal for restoration work and as protection for Buffa mineral finish coats. For indoor and outdoor use.

• Apply evenly with brush, roller or spray.

Deep-penetrating breathable barrier coat, formulated with special water soluble acrylic polymers. Treated substrates are guaranteed impervious to water and oils, resistant to abrasion, and flexible. Suitable for the protection of cotto, natural stone, pressed brick and fair-faced concrete, as base coat for acrylic coatings and as primer when encapsulating asbestos cement with Coper Max, etc.

• Apply with brush, roller or spray.

Bright, transparent protective finish, superior quality, for Linea Contrasti products.

• Visual effect: bright finish.
• Apply with brush.

Satin transparent protective finish, superior quality, for Linea Contrasti products.

• Visual effect: satin finish.
• Apply with brush.

Deep penetrating protective stabilizer, ready to use. Guarantees waterproof and tough finish for substrates. Ideal for crumbling screeds and cementitious substrates. For indoor and outdoor use.

• Apply with brush, roller or spray.

Deep penetrating protective stabilizer, ready to use, formulated with modified silicates. Ideal for application to surfaces such as powdery plasters and eroded substrates, and for treating mineral coatings affected by efflorescence. For indoor and outdoor use.

• Apply with brush, roller or spray.

Deep penetrating protective stabilizer, transparent and breathable, ready to use, superior technology, formulated with modified silicates. Ideal for application to surfaces such as powdery plasters and eroded substrates, fair-faced concrete, natural stone, tufa, etc. Ideal for restoration work. For indoor and outdoor use.

• Apply with brush, roller or spray.

Water-based product for removing old paint and thermoplastic resin coatings, even in enclosed environments.

• Apply with brush.

Two-part epoxy resins, low viscosity, for injection into masonry to repair and stabilize cracks caused by deterioration. Suitable for concrete.

• Mix parts A+B
• Apply with gravity or low pressure feed system.

Acid-based cleaning fluid for removing traces of cement and lime. Suitable for clean-up operations after laying and fixing tiles, cotto, marble, etc.

• Dilute with water according to substrate.
• Apply with brush or sponge.

Ready to use cleaning fluid for removing traces of epoxy grout from fully vitrified stoneware, klinker, etc.

• Apply with brush or sponge.

Aggressive acid cleaner intended specifically for the removal of particularly stubborn cement residues, encrustations in general, efflorescence, etc., from walls and floors.

• Apply with brush.

Alkaline cleaner, suitable for removing cement residues, encrustations in general, efflorescence, moulds and mosses, in small amounts, from walls and floors of natural stone, marble, cotto, tiles, etc. Also effective for cleaning surfaces soiled with grease, soot and another elements produced by smog.

• Apply with brush.

Clear protective wax, ideal for Linea Contrasti products, enhancing the appearance of interior walls and giving added brightness.

• Recommended on Harmony, Calce Classic and Terrastar Marmo.
• Apply with stainless steel trowel or float.

Special thinner for Buffer solvent-based products.

Specific thinner for Coper Trasparent.

Specific thinner for Viduest.

Specific thinner for Azzurro Vita 2C.

Specific thinner for epoxy products.