Produits

Rust converter, designed to convert iron oxides into stable phosphates. Ideal for reinforcement rods.

• Apply with brush.

One-part protective grout, passivating and rust-inhibiting­, for reinforcement rods and concrete.

• Apply with brush.

Rheoplastic non-shrink mortar, thixotropic, fibre-reinforced, superior technology, for rehabilitation of concrete. Ideal for repair of reinforced concrete structures, reconstruction of missing parts and remediation of cracks in masonry. Notable adhesion and abrasion resistance. Ideal also in coastal areas. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel.

Rheoplastic non-shrink mortar, thixotropic, fibre-reinforced, superior technology, fast bonding and setting, controlled shrinkage, for rehabilitation of concrete. Ideal for repair of reinforced concrete structures, reconstruction of missing parts and remediation of cracks in masonry. Notable adhesion and abrasion resistance. Ideal also in coastal areas. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with trowel.

Rheoplastic and thixotropic mortar, fibre-reinforced, resistant to abrasion. Suitable for repairing reinforced concrete and reconstruction of missing parts; also particularly effective for filling chases and cracks. Can be applied in coats up to 4 cm thick.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel.

Non-shrink thixotropic mortar, fibre-reinforced, medium-fine, for rehabilitation of concrete. Suitable for repairing reinforced concrete and reconstruction of missing parts. Can also be used as base coat for skimming over concrete.
For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply with trowel.

Non-shrink thixotropic mortar-skim coat, fibre-reinforced, optimum filler, for repairing and skimming reinforced concrete structures. For indoor and outdoor use.

• Maximum grain size: 1.5 mm.
• Apply with stainless steel trowel or spreader.

Rheoplastic mortar, fibre-reinforced, high strength, for plastering and screeding over concrete. Suitable also for structural reinforcement and repair of masonry, embedding electrically welded and galvanized grid mesh. Designed for application in thicknesses of up to 30 - 40 mm per coat. Ideal as base coat for Koboss damp-proofing treatment.
For indoor and outdoor use.

• Maximum grain size: 3 mm.
• Apply with trowel or projector.

Rheoplastic fluid mortar, fibre-reinforced, compensated shrinkage, for repairing and stabilizing concrete structures. Suitable for the structural remediation of reinforced concrete beams, pillars and floor slabs. Also suitable for repairing low concrete walls. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with machine or manually.

Rheoplastic fluid mortar, fibre-reinforced, controlled expansion. Ideal for anchoring foundation bolts, lugs, machine tool frames, and bolts applied to concrete structures. For indoor and outdoor use.

• Maximum grain size: 1.2 mm.
• Apply by hand.

Water-repellent sealant bead made of natural sodium bentonite, suitable for building applications where there is a need for faultless horizontal and vertical hydraulic seals at underground construction joints in concrete.

Ready to use concrete mix. Enables quick application and guarantees long term durability. Ideal for laying screeds and effecting repairs, inspection chambers, ground beams, floor slabs, etc.
Also ideally suitable for filling door and window frames, chases, covering PVC pipes, galvanized pipes and ferrous materials, on walls and floors alike.
For indoor and outdoor use.

• Application: the mortar should be mixed to a uniform and fluid consistency; use a drum mixer for screeds laid by hand, or purpose-designed mixing and pumping equipment when laid mechanically. Finish with straightedge.

Non-shrink hydraulic binder, fast-bonding and curing (2-3 minutes), for securing lugs, sub-frames, security grilles, sanitary wares and pipes, and to stop small water leaks. For indoor and outdoor use.

• Apply with trowel.

Non-shrink hydraulic binder, medium-fast bonding and setting (10-15 minutes). Ideal for filling in chases and cavities, anchoring junction boxes, securing sub-frames, embedding PVC conduit at floor level and for making good facades. For indoor and outdoor use.

• Apply with trowel.

Hydraulic binder, ultra-fast boding and setting, for stopping pressurized water leaks.
For indoor and outdoor use.

• Apply by hand.

Premixed mortar, thixotropic, shapeable, fibre-reinforced, medium-fast setting. Ideal for repairs and making good, levelling up, filling holes and channels in substrates, and renewing corner edges. Suitable for thicknesses from 1 to 30 mm. Total hardening time 5-15 hours, depending on thickness. For indoor and outdoor use.

• Apply with mason's trowel and smooth plasterer's trowel, stainless steel

One-part osmotic cement mortar, waterproof, breathable, for basement areas such as lift shafts, cellars, etc. For indoor and outdoor use.

• Apply with brush, projector or smooth stainless steel trowel.

Two-part osmotic cement mortar, waterproof, high strength, superior technology, for protection and waterproofing of ground beams, roofs, terraces, balconies, floor slabs, walls, showers, water tanks, planters, pools, tunnels, etc. For indoor and outdoor use.

• Mix parts A+B
• Apply with brush, projector or smooth stainless steel trowel.

Salt-resistant microporous skimming plaster, fibre-reinforced, colour pearl grey, used in specific cycles for the treatment of damp concrete and masonry without the need to remove old plaster. To be applied thinly over existing cement render when still uniformly flat and cohesive, and over reinforced concrete or fibre-reinforced filling mortars, having first cleaned the affected parts of the surface with a suitable power grinder. Koboss is applied in two coats, embedding Rete PB coated mesh in the first coat. Thereafter, use Koboss 0.6 or Koboss 0.3 and complete the cycle with a breathable finish. For indoor and outdoor use.

• Maximum grain size: 2 mm.
• Apply with stainless steel float.

Microporous finishing skim coat, colour white, used in specific cycles for the treatment of damp concrete and masonry. For use after the application of Koboss base coat.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with stainless steel float.

Microporous finishing skim coat, colour white, used in specific cycles for the treatment of damp concrete and masonry. For use after the application of Koboss base coat or Koboss 0.6. For indoor and outdoor use.

• Maximum grain size: 0.3 mm.
• Apply with stainless steel float.

Two-part epoxy resins, low viscosity, for injection into masonry to repair and stabilize cracks caused by deterioration. Suitable for concrete.

• Mix parts A+B
• Apply with gravity or low pressure feed system.

Premixed skim coat containing quartz, breathable, superior technology, for use on two-coat plaster, textured prefabricated concrete panels and other new non-smooth cementitious substrates. Mixed with Bond LT51, offers superior bonding power, elasticity and waterproof properties, with adhesion also to old cementitious substrates, walls and floors, wa­ter tanks and pools­, and for restoration work. For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, waterproof, breathable, superior technology, for use on two-coat plaster, textured prefabricated concrete panels and other new non-smooth cementitious substrates. Mixed with Bond LT51, offers greater bonding power and flexibility; good adhesion even to old cementitious substrates.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, waterproof, one-part, superior technology, breathable. Protects cementitious surfaces on facades from carbonation and is suitable for repair work on deteriorated reinforced concrete. For use on cementitious substrates, two-coat plaster, prefabricated concrete panels and Thermo Panels. Ideal for making good and skimming new and old walls. Especially suitable for restoration work. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Premixed skim coat containing quartz, two-part, superior technology. For use on two-coat plaster, prefabricated concrete panels, cementitious substrates, reinforced concrete pools and tanks. Ideal also for cementitious floors and screeds. Intended in particular for restoration work. Can be reinforced with Rete PB coated mesh.
For indoor and outdoor use.

• Mix parts A+B
• Maximum grain size: 0.6 mm.
• Apply with smooth stainless steel trowel and finish with sponge float.

Protective quartz paint, superior quality, anti-carbonation, for fair-faced reinforced concrete.
For indoor and outdoor use.

• Apply with brush, roller or spray.

Protective quartz paint, flexible, superior quality, anti-carbonation, for fair-faced reinforced concrete. For indoor and outdoor use.

• Apply with brush, roller or spray.