Produits

One-part osmotic cement mortar, waterproof, breathable, for basement areas such as lift shafts, cellars, etc. For indoor and outdoor use.

• Apply with brush, projector or smooth stainless steel trowel.

Two-part osmotic cement mortar, waterproof, high strength, superior technology, for protection and waterproofing of ground beams, roofs, terraces, balconies, suspended floor slabs, walls, showers, water tanks, planters, pools, tunnels, etc. For indoor and outdoor use.

• Mix parts A+B
• Apply with brush, projector or smooth stainless steel trowel.

One-part binder, used to form the embedding layer for Rete PB and Rete PB Fine coated mesh, as preparation of substrate to receive flexible waterproofing systems.

• Apply with brush, roller or spray.

Ready to use fibre-reinforced elastomer filler and skim coat, for waterproofing bathrooms, showers and kitchens, can also be used on drywall. Top Elast Fibro sets to a rough finish, providing a firm key for special adhesives used to fix ceramic, stoneware and glass mosaic tiles, marble, etc. Ideal for waterproofing outside walls exposed to the elements and pitched roofs, providing an optimum bond with the mortar used for roof tiles, and on existing ceramic wall and floor tiles that require skimming in preparation for tiling over. When used for waterproofing purposes, apply Giunto Bond, Angolare B10 and Angolare B11 beforehand.
For indoor and outdoor use.

• Apply with stainless steel trowel or spreader.
• N.B. Protect with Elasto Paint on facades.

Ready to use water-based bituminous liquid membrane, for waterproofing ground beams, retaining walls, cellars, pitched roofs, etc.

• Apply with brush or roller.

Ready to use liquid membrane, flexible, semi-trafficable, for waterproofing flat or pitched roofs, terraces, balconies, concrete, etc. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Can be reinforced with Rete PB Fine coated mesh or Velo Vita.

• Apply with brush or roller.

Ready-to-use liquid membrane, fibre-reinforced, elastic, superior technology, highly flexible, semi-trafficable, for waterproofing flat or pitched roofs, terraces, balconies, concrete, etc. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Can be reinforced with Rete PB Fine coated mesh or Velo Vita.

• Apply with brush or roller.

Ready-to-use liquid membrane, superior technology, elastic, good filling and bonding power, high strength, semi-trafficable, for waterproofing flat or pitched roofs, terraces, balconies, wood or sheet metal roofing, etc. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Can be reinforced with Rete PB Fine coated mesh or Velo Vita.

• Apply with brush or roller.

Ready to use one-part paste membrane, innovative, water-based, good filling power and strong bond with substrate, waterproof, semi-trafficable and highly flexible. Ideal for bathrooms, terraces, balconies, pools, basements before laying and fixing floor and wall tiles, natural stone and mosaic. Also suitable for wood or sheet metal roofing, and foundations. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Can be reinforced with Rete PB e Rete PB Fine coated mesh or Velo Vita, embedded in first coat.

• Apply with brush, roller or spray.

Ready to use one-part paste membrane, fibre-reinforced, good filler, flexible, semi-trafficable, for terraces, flat or pitched roofs, providing optimum bond with roof-tile mortar. Ideal for bathrooms, showers, kitchens, exposed outside walls. Also bonds with wood, metal, plastic, ceramic body, etc. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Can be reinforced with Rete PB coated mesh, embedded in first coat. Protect with Elasto Paint on facades, Coper Paint or Coper Paint Finish AS n floors.

• Apply with smooth stainless steel trowel.

One-part polyurethane liquid membrane, elastic, trafficable, superior quality, flexible, high strength, for protection and waterproofing of roofs, terraces, balconies, suspended floor slabs, cornices, etc., faultless adhesion to substrates, even in direct contact with ceramics and metals. Also allows application on slightly damp substrates and withstands standing water. Can be reinforced with Velo Vita.

• Apply with short pile roller or spray.

Special liquid membrane, transparent, trafficable, protective, flexible, deep penetrating, for waterproofing roofs, terraces, balconies, cementitious substrates­, stone and cement cornices, etc. Use on ceramic body not advisable. Ideal on absorbent substrates.

• Dilute with Diluente 200,400 thinner at a rate of 20%.
• Apply with brush or roller.

Two-part cement-based membrane, fibre-reinforced, flexible, trowelable, high strength, for waterproofing flat roofs, terraces, balconies, pitched roofs, showers, water tanks, pools, ground beams, etc., with good adhesion to ceramic body. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Paving can be laid directly over the membrane. Reinforcement with Rete PB is recommended, embedding the mesh in the first coat of Coper Cem Flex 2C. Protect with Coper Paint if left exposed.

• Mix parts A+B
• Apply with stainless steel trowel or spreader.

Two-part cement-based membrane, fibre-reinforced, flexible, high strength, for waterproofing flat roofs, terraces, balconies, pitched roofs, showers, water tanks, pools, ground beams, etc., with good adhesion to ceramic body. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Paving can be laid directly over the membrane. Reinforcement with Rete PB is recommended, embedding the mesh in the first coat of Coper Cem Flex 2C. Protect with Coper Paint if left exposed.

• Mix parts A+B
• Apply with brush or roller.

Two-part cement-based membrane, superior technology, good filler, flexible, trowellable, high strength, grey, for waterproofing ground beams, concrete structures, basements, etc. Apply Giunto Bond, Angolare B10 and Angolare B11 beforehand. Paving can be laid directly over the membrane. Reinforcement with Rete PB is recommended, embedding the mesh in the first coat of Coper Cem Flex Fondazione 2C.

• Mix parts A+B
• Apply with smooth stainless steel trowel.

Two-part cement-based membrane, fibre-reinforced, flexible, trowellable, high strength, for waterproofing flat roofs, terraces, balconies, pitched roofs, showers, water tanks, pools, ground beams, etc., with good adhesion to ceramic body. Apply accessories Giunto Bond, Angolare B10 and Angolare B11 beforehand. Paving can be laid directly over the membrane. Reinforcement with Rete PB coated mesh is recommended, embedding in the first coat of Coper Mono Flex. Protect with Coper Paint if left exposed.

• Apply with smooth stainless steel trowel.

Flexible water-based membrane for the protection of Buffa products Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex and Coper Bond Elast, if left exposed. Resistant to U.V. radiation. Can be reinforced with Rete PB Fine coated mesh or Velo Vita.

• Apply with brush, roller or spray.

Flexible water-based membrane, thick coat, for the protection of Buffa products Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex and Coper Bond Elast, if left exposed. Resistant to U.V. radiation. Can be reinforced with Rete PB Fine coated mesh or Velo Vita.

• Apply with brush, roller or spray.

One-part waterproof membrane, flexible, good filler, trafficable, for protection of concrete substrates. Ideal on Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex and Coper Bond Elast. Can be reinforced with Rete PB or coated Rete PB mesh, or with Velo Vita.

• Apply with smooth stainless steel trowel or spreader.

Ready-to-use liquid membrane, high reflective power, good filler, superior technology, waterproof, semi-trafficable, high flexibility and adhesion, for UV protection of Buffa Coper Cem Flex 2C, Coper Cem Flex Roll 2C and Coper Mono Flex membranes if left exposed; applied to floors and walls. Can be reinforced with Rete PB Fine coated mesh or Velo Vita.

• Apply with brush, roller or spray using suitable equipment, horizontally and vertically.

Waterproof elastomer paint, for crazed external facades. Ideal for the protection of outside walls, plastered and skimmed surfaces or crazed finishes, and fair-faced reinforced concrete structures. Suitable for the protection of Coper Bond Elast and Top Elast Fibro on facades.

• Apply with brush, roller or spray.

One-part waterproof membrane, flexible, good filler, tough, trafficable, for protection of cement and asphalt paving. Maintains elasticity over time.

• Apply with smooth stainless steel trowel or spreader.

Two-part waterproof membrane, flexible, good filler, tough, trafficable, for protection of cement and asphalt paving. Maintains elasticity over time.

• Mix parts A+B
• Apply with smooth stainless steel trowel or spreader.

Solvent-based protective stabilizing primer with high penetrating power, used as preparation for finish coats, including plastic resins, paints, liquid membranes, and Coper Max encapsulant for asbestos cement. Optimum as impregnant for plasters, fair-­faced stone and concrete, wet look. For outdoor use.

• Dilute first coat with Diluente 200.500 at a rate of 20 to 30%, depending on the substrate.
• Apply with brush, roller or spray.

Liquid membrane, specifically for encapsulating and inertizing asbestos cement structures. Prevents the separation and release into the atmosphere of asbestos particles. Optimum flexibility and resistance to weathering agents.

• As primer, use Viduest.
• Dilute first coat with water at a rate of 10/15%.
• Apply with brush, roller or spray.

Waterproof strip, high strength and flexibility, intended for waterproofing expansion joints and corner joints between vertical and horizontal planes.

• Thickness 0.5 mm approx, width 12 cm.

Waterproof angle, high strength and flexibility, designed for waterproofing internal corner joints between vertical and horizontal planes.

• Thickness 0.5 mm approx, width 12 cm.

Waterproof angle, high strength and flexibility, designed for waterproofing external corner joints between vertical and horizontal planes.

• Thickness 0.5 mm approx, width 12 cm.

Anchoring membrane, resistant to damp, specially formulated for fixing Giunto Bond and Angolare B10/B11 waterproof accessories on roofs and terraces, and in showers, pools and foundations.

• Apply with stainless steel trowel or brush.

Glass fibre reinforcing mesh, certified ETAG 004 and ITC-CNR, coated, alkali-resistant, for skimming plasters and for Buffa waterproofers: Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex, Coper Bond Elast, Coper Paint Finish AS, etc., and for Thermovita Cladding System.

• Roll: 50 linear m.
• Weight: 160 g/m²

Glass fibre reinforcing mesh, coated, alkali-resistant, for waterproofing and skimming applications. Used with Buffa liquid membranes: Coper Gum, Coper Flex Fibro, Coper Bell, Elasto Paint, Coper Paint, Coper Paint Plus, Coper Paint Finish AS, Coper Therm, etc.

• Roll: 100 linear m.
• Weight: 60 g/m²

Glass fibre reinforcing mesh, for skimming plasters and for Buffa waterproofers: Coper Cem Flex 2C, Coper Cem Flex Roll 2C, Coper Cem Flex Fondazione 2C, Coper Mono Flex, etc., and for Thermovita Cladding System.

• Roll: 50 linear m.
• Weight: 160 g/m²

Special polyester fibre fabric, provides reinforcement for waterproofing systems. Used with Buffa liquid membranes: Coper Gum, Coper Flex Fibro, Coper Bell, Coper Tron, Coper Paint, Coper Paint Plus, Coper Paint Finish AS, Coper Therm, etc.

• Roll: 200 m, width 1.5 m.

Special-purpose adjustable spreader for Coper Cem Flex 2C and Coper Mono Flex cement-based membranes and for self-levelling screeds.